Acronis Access Advanced - Installation Guide User Manual

Page 75

13. The Access Server tab is used to configure your Acronis Access Server’s network address, port,

and certificate. The Acronis Access Server is the web console that is used to perform all server
administration and remote client management. This console replaces the mobilEcho
Administrator Windows program and is required.

Note: Please review the settings for the Access Server. The default settings are recommended. This web
console typically runs on all available network addresses on port 3000. If you have an existing SSL
server identity certificate, it will be automatically selected. If you do not, a self-signed certificate will be
generated.

14. Acronis Access Server requires that a File Repository location be selected. If you are using

mobilEcho only, this File Repository will not be used to store anything, but setting a location is
still required.

This repository is used by Acronis’ activEcho file sync and share features. These features will not be
enabled if you are upgrading a server that does not already have them installed, but you can chose to
enable them at a later time, if desired.

The default location for the File Repository is:

C:\ProgramData\Acronis\Access\FileStore