Acronis Access Advanced - Installation Guide - Manual (Page 6)

6 Copyright © Acronis International GmbH, 2002-2014
Supported OS's:

iOS 6 or later

Android 2.2 or later (Devices with x86 processor architecture are not supported)
The Acronis Access app can be downloaded from:

For iOS http://www.grouplogic.com/web/meappstore

For Android https://play.google.com/store/apps/details?id=com.grouplogic.mobilecho
1.1.3 Minimum Hardware Recommendation
Processor: Intel/AMD
Note: Acronis Access server can be installed on virtual machines.
Memory:

Production environments: 8 GB minimum. More recommended.

Trial or Тest environments: 4 GB minimum. 8 GB or more recommended.
Disk Space:

The software installation requires 300MB of disk space.
Note: Please make sure that you have enough space to run the Acronis Access installer. 1GB of space is
required for the installer to run.

The file repository used by the Sync & Share features is installed on the local computer by
default.

Enough free space should be provided to meet testing parameters. 50 GB or more is
recommended.
1.1.4 Network Requirements

1 Static IP Address. 2 IP addresses may be needed for certain configurations.

Optional but recommended: DNS names matching the above IP addresses.

Network access to a Domain Controller if Active Directory will be used.

Network access to an SMTP server for email notifications and invite messages.

The address 127.0.0.1 is used internally by the Access Mobile Client and should not be routed
through any kind of tunnel - VPN, MobileIron, Good Dynamics and etc.

All machines running the Access Server or the Gateway Server need to be bound to the Windows
Active Directory.
There are two components that handle HTTPS traffic, the Gateway Server and the Acronis Access
Server. The Gateway Server is used by mobile clients to access both files and shares from the Data
Sources. The Access Server provides the web user interface for Sync & Share clients, and is also the
administration console for both Mobile Access and Sync & Share. It is recommended that two IP
addresses be assigned to the server along with two separate DNS entries for those addresses.
However, the server can be configured to use only one IP address with different ports for each
component. This one IP address configuration is sufficient for most Mobile Access-only installations
but two IP addresses is recommended when using Sync & Share as well.