Acronis Access Advanced - Installation Guide User Manual

Page 159

159

2. Enter the DNS name or IP address of your LDAP server.
3. Enter the port of your LDAP server.
4. If you use a certificate for connections with your LDAP server, mark Use Secure LDAP

Connection.

5. Enter your LDAP credentials, with the domain. (e.g. acronis\hristo).
6. Enter your LDAP search base.
7. Enter the desired domain(s) for LDAP authentication. (i.e.to enable LDAP authentication for an

account with the email [email protected], you would enter glilabs.com)

8. Press Save.

Local Gateway Server

Note: If you're installing both a Gateway Server and the Acronis Access Server on the same machine, the
Gateway Server will automatically be detected and administered by the Acronis Access Server. You will be
prompted to set the DNS name or IP address on which the Local Gateway Server will be reachable by clients.
You can change this address later on.

1. Set a DNS name or IP address for the local Gateway Server.
2. Press Save.

6.2 Configuring Your First Gateway Server and Data

Source

Registering a new Gateway Server:

1. Go to the computer on which you have the Gateway Server installed.
2. Open https://localhost/gateway_admin.