Metrohm 785 DMP Titrino - Manual (Page 94)

3.2 Remote control commands
785 DMP Titrino
91
³ ³ Ã .C43 Volume drift in SET read only/read+write
³ ³ Ã .C44 Titration temperature read only/read+write
³ ³ Ã .C45 Start volume read only/read+write
³ ³ Ã .C46 Asymmetry pH read only
³ ³ Ã .C47 Slope of electrode read only
³ ³ Ã .C48 Volume at maximum voltage read only/read+write
³ ³ Ã .C49 Volume at minimum voltage read only/read+write
³ ³ Ã .DTime Time for drift corr.or dosing time read only/read+write
³ Ã .FixEP Fix EP
³ ³ Ã .51 C51
³ ³ ³ Ã .Value Value read only 3.2.2.97.
³ ³ ³ up to 59
³ Ã .pK pK/HNP
³ ³ Ã .61 C61
³ ³ ³ Ã .Value Value read only ditto
³ ³ ³ up to 69
³ Ã .TempVar Temporary variables C7X
³ ³ Ã .C70 up to C79 read only/read+write ditto
³
à .StatisticsVal Statistics values
³ Ã .ActN Number of results in chart read only 3.2.2.98.
³ Ã .1 1 st mean
³ ³ Ã .Mean Mean read only ditto
³ ³ Ã .Std Absolute standard deviation read only ditto
³ ³ Ã .RelStd Relative standard deviation read only ditto
³ Ã up to 9 mean values
³
à .SiloCalc Values of silo calculations
³ Ã .C24 Values of variable C24
³ ³ Ã .Name Name read only 3.2.2.99.
³ ³ Ã .Value Value read only ditto
³ ³ Ã .Unit Unit read only ditto
³ Ã .C25 as for C24
³ Ã .C26 Values of variable C26
³ ³ Ã .ActN Number of single values read only ditto
³ ³ Ã .Mean Mean value read only ditto
³ ³ Ã .Std Absolute standard deviation read only ditto
³ ³ Ã .RelStd Relative standard deviation read only ditto
³ Ã .C27 as for C26
³ "Info", continuation
à .ActualInfo Current data
³ Ã .Inputs I/O Inputs
³ ³ Ã .Status Line status read only 3.2.2.100.
³ ³ Ã .Change Change of line status read only ditto
³ ³ Ã .Clear Clear change $G ditto
³ Ã .Outputs as for I/O Inputs
³ Ã .Assembly From Assembly
³ ³ Ã .CyclNo Cycle number read only 3.2.2.101.
³ ³ Ã .Counter Assembly counter read only 3.2.2.102.
³ ³ ³ Ã .V Volume counter read only ditto
³ ³ ³ Ã .Clear Clears counter $G ditto
³ ³ Ã .Meas Measured value read only 3.2.2.103.
³ Ã .Titrator From Titrator
³ ³ Ã .CyclNo Cycle number read only 3.2.2.104.
³ ³ Ã .V Volume read only ditto
³ ³ Ã .Meas Measured indicator voltage read only ditto
³ ³ Ã .dVdt Volume drift dV/dt read only ditto
³ ³ Ã .dMeasdt Measured value drift read only ditto