Metrohm 785 DMP Titrino User Manual
Page 74
3.1 General rules
785 DMP Titrino
71
.Meas.Buf1:
Instrument in the CAL mode, measures buffer 1.
.Req.Buf2:
Instrument in the CAL mode, requesting pH of buffer 2.
.Meas.Buf2:
Instrument in the CAL mode, measures buffer 2.
etc.
$G .Assembly.Bur .Fill:
Buret in filling process
.ModeDis:
Buret in DIS mode
In TIP, its global status as well as the step number (X) is available.
$G .TIP.X
.Inac:
Instrument at the beginning or at the end of a TIP.
.Req .Id1:
Instrument in the TIP mode, requesting Id1 after start.
.Id2:
Instrument in the TIP mode, requesting Id2 after start.
.Id3:
Instrument in the TIP mode, requesting Id3 after start.
.Smpl:
Instrument in the TIP mode, requesting sample size after start.
.Unit:
Instrument in the TIP mode, requesting unit of sample size after start.
.Pause:
Instrument in the TIP mode, in pause.
.Info:
Instrument in the TIP mode, in info.
.Mode...:
Instrument in the TIP mode, working off a submethod. The detailed
status messages of the submethod appear, see above.
Status conditions of the global $H:
The status message of the action which has been held appears.
If the process is held because a monitored limit has been violated, its status
message is $H.Mode.XXX.Titr.
Status conditions of the global $C:
The status conditions of the global $C are identical with the ones of the global
status $G. They appear when the process has been restarted actively from
the status "Hold" ($C, key
an error).