Metrohm 785 DMP Titrino - Manual (Page 12)

2.4 Configuration, key
785 DMP Titrino
9
remote box: OFF
keyboard: US
barcode: input
Connection of a remote box (on ,OFF)
To the remote socket for PC keyboard and barcode
reader, see page 155.
If "on" has been set:
Type of PC keyboard (US, German, French, Spanish,
Swiss.)
The PC keyboard is used as an input aid, see page
156.
Target for barcode reader (input, method, id1, id2, id3,
smpl size)
The barcode reader is used as an input aid, see page
155.
Input: The barcode string goes to the entry field in
which the cursor is currently located.
Method: The barcode string goes to the entry field
"Methods" in the silo memory.
Id1: The barcode string goes to the entry field
"Id1". (Similar for Id2 and Id3.)
Smpl size: The barcode string goes to the entry
field "smpl size".
>auxiliaries
dialog: english
date 1998-04-23
time 08:13
run number 0
auto start OFF
start delay 0 s
result display: bold
General settings
Selection of dialog language (english, deutsch,
francais, español, italiano, portugese, svenska)
Current date (YYYY-MM-DD)
Format: Year-month-day, entry with leading zeros.
Current time (HH-MM)
Format: Hours-minutes, entry with leading zeros.
Current run number for result output (0...9999)
The sample number is set to 0 when the instrument is
switched on and incremented on every determination.
Automatic starts of titrations. (1...9999, OFF)
Number of automatic starts ("number of samples").
Used for instrument interconnections in which the
external instrument does not initiate a start. Not
advisable in connections with Sample Changers.
Start delay (0...999 999 s)
Delay time after start of methods. Abort start delay time
with .
Type of result display at the end of the determination
(bold, standard)
bold: The calculated results are displayed in bold
characters.
standard: Displays the whole information, e.g. results,
endpoints, messages etc.