Metrohm 785 DMP Titrino - Manual (Page 68)

2.17 Storing determination results and silo calculations
785 DMP Titrino
65
Starting from the following silo report:
*
*
*
with "match id: off" the following silo calculation report (scalc full) is obtained:
With "match id: id1" the following silo calculation report (scalc full) is obtained:
The short silo calculation report contains only calculations for the current sample.
The mean values of the silo calculations are available for further result calculations as C26
and C27 and can be used in the Titrino in formulas.
Mean value of C24 ⇒ C26
Mean value of C25 ⇒ C27
Important:
• If work is performed with silo calculations, the method name must be entered in the
silo memory.
• Results will be overwritten in the silo recalculation, as long as the silo line is marked
with "/". If you do not wish such an input, e.g. because you work off an urgent sample
between a series, disconnect the silo.
'si
785 DMP Titrino 0P1/101 785.0010
date 1999-06-27 time 08:54 14
>silo
cycle lines: OFF
save lines: ON
sl method id 1/C21 id 2/C22 id 3/C23 C00 C24 C25
+ 1 11-2 A/12 94-09-12 0.233g 0.142ml/min 98.53%
+ 2 0-15 A/13 94-09-12 0.286g 0.9976 NV
+ 3 0-15 A/13 94-09-12 0.197g 0.9947 NV
+ 4 11-2 A/12 94-09-12 0.288g 0.138ml/min 95.75%
/ 5 11-2 A/15 94-09-12 0.263g 0.145ml/min 100.61%
Assignment
for C24 only
:
method id 1/C21 id 2/C22 id 3/C23 mean +/-s n
11-2 * * * Rate 0.142ml/min 0.0035 3
Content 98.30% 2.438 3
0-15 * * * Titer 0.9962 0.00105 2 All samples
which have been
processed with
the same me-
thod are com-
bined
:
method id 1/C21 id 2/C22 id 3/C23 mean +/-s n
11-2 A/12 * * Rate 0.140ml/min 0.0028 2
Content 97.14% 1.966 2
0-15 A/13 * * Titer 0.9962 0.00105 2
11-2 A/15 * * Rate 0.145ml/min 0.000 1
Content 100.61% 0.000 1 Sample proces-
sed with the
same method
and having the
same id1 are
combined
:
method id 1/C21 id 2/C22 id 3/C23 mean +/-s n
11-2 A/15 * * Rate 0.145ml/min 0.000 1
Content 100.61% 0.000 1