Metrohm 785 DMP Titrino User Manual
Page 115
3.2. Remote control commands
785 DMP Titrino
112
SmplData.ONSilo.EditLine.1.Id3
up to 8 ASCII characters
SmplData.ONSilo.EditLine.1.ValSmpl 6-digits, sign and dec.point
SmplData.ONSilo.EditLine.1.UnitSmpl
up to 5 ASCII characters
SmplData.ONSilo.EditLine.1.C24
read only
SmplData.ONSilo.EditLine.1.C25
read only
SmplData.ONSilo.EditLine.1.Mark
read only
etc., up to .255
Contents of a silo line.
.Method: Method used to process the sample, from the method memory or
from the card.
.Id:
The identifications Id1...Id3 can also be used as sample-specific
calculation constants C21...C23 in formulas.
.UnitSmpl: If "no unit" is desired for the sample size, the blank string must be
entered.
.C24, .C25: Results which have been assigned to C24 and C25.
.Mark:
Mark of the silo line: "*"=deleted line, "+"=line which is worked
off, "-"= line which is worked off and not valid for silo calcula-
tions (deleted), "/" last worked-off line, where recalculation can
still be done. Silo lines which have been worked off are "read
only".
3.2.2.87. SmplData.ONSilo.DelLine
$G
SmplData.ONSilo.DelLine.LineNum
1...255, OFF
Deletion of a silo line. The line # is deleted with &SmplData.ONSilo.DelLine
$G. If a formerly deleted line is edited again, it becomes valid (function
"undelete").
3.2.2.88. SmplData.ONSilo.DelAll
$G
Deletes the entire silo memory. Must be triggered with $G.
3.2.2.89. SmplData.ONSilo.CycleLines
ON, OFF
Silo data cycling.
With "ON", executed lines are copied to the next free silo lines, see page 62.
Exercise caution if you edit the silo memory during the determinations!
3.2.2.90. SmplData.ONSilo.SaveLines
ON, OFF
Silo lines are not deleted when they are worked off. Assigned results are
stored as C24 and C25. "Save lines" can only be set to "ON" if the silo is
completely empty. Delete the silo, see 3.2.2.88.
3.2.2.91. HotKey.User.Name
up to 10 ASCII characters
HotKey.User.Delete
$G
HotKey.User.Delete.Name
up to 10 ASCII characters
HotKey.User.DelAll
$G
HotKey.User.List.1.Name
read only
Management of user names.
.Name:
Input of user names.
.Delete.Name: Deletes selected user name with &HotKey.User.Delete $G.