Metrohm 785 DMP Titrino User Manual
Page 49
2.10. Data output
785 DMP Titrino
46
Additional possibilities for report outputs
In addition to the reports which are printed at the end of the titration, various other reports
can be put out. There are 2 possibilities to select the reports:
1)
←
/
→
>
Cursor is pressed repeatedly until the desired report
appears in the display.
2)
key X is the key under which the appropriate data
are entered.
List of the "keys X":
Report
Configuration report
CONFIG
Parameter report
PARAM
Current sample data
SMPL DATA
Statistics report with the individual results
STATISTICS
All sample data from the silo memory
SILO
Calibration data
CAL.DATA
Content of the current card directory
CARD
Operands C01...C19
C-FMLA
Contents of the
DEF
Contents of the method memory with details of the memory
requirements of the individual methods and the remaining bytes
USER METH
Complete report sequence of the last determination, as defined
under the
REPORTS
Result display without printer
If you work without printer, we recommend to work with the standard character set for
result display (settings in key
complete information on your determinations: Calculated results, endpoints, messages
etc.