Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 150
150
Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured temperature of the bottom inverter IGBT power module
in degrees C.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured inverter coldplate temperature in degrees C. This
parameter is only usable if a coldplate temperature sensor is installed in the drive.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured ambient temperature of the drive in degrees C.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured drive power supply temperature in degrees C.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
348
Inv IGBT Tmp Bot
Range:
-3276.8...3276.7 °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
345, 346, 347
349
Inv Coldplt Tmp
Range:
-3276.8...3276.7 °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
350
Inv Ambient Tmp
Range:
-3276.8...3276.7 °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
351
Inv PS Tmp
Range:
-3276.8...3276.7 °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also: