Rockwell Automation Liqui-Flo V2.0 AC Drive - Manual (Page 138)

138 Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
Adapter that has requested exclusive control of drive logic functions.
If an adapter is in local lockout, all other functions (except stop) on all other
modules are locked out and non-functional. Local control is obtained only when
the drive is stopped.
Parameter number whose value is written from a communications device data
table.
Parameters that can be changed only while the drive is stopped cannot be used as
Datalink inputs. Entering a parameter of this type disables the link
Refer to the appropriate communications option board manual for datalink
information.
Parameter number whose value is written from a communications device data
table.
Parameters that can be changed only while the drive is stopped cannot be used as
Datalink inputs. Entering a parameter of this type disables the link.
Refer to the appropriate communications option board manual for datalink
information.
297 Local Owner
Range: See Stop Owner (288)
Default: Read Only
Access: 1 Path: Communication > Masks & Owners
See also: 276...285
300
301 Data In A1 - Link A Word 1
Data In A2 - Link A Word 2
Range: 0...387 [1]
Default: 0 (Disabled)
Access: 1 Path: Communication > Datalinks
See also:
302
303 Data In B1 - Link B Word 1
Data In B2 - Link B Word 2
Range: 0...387 [1]
Default: 0 (Disabled)
Access: 1 Path: Communication > Datalinks
See also: