Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 139
Rockwell Automation Publication D2-3518-3 - May 2013
139
Chapter 9
Parameter number whose value is written from a communications device data
table.
Parameters that can be changed only while the drive is stopped cannot be used as
Datalink inputs. Entering a parameter of this type disables the link.
Refer to the appropriate communications option board manual for datalink
information.
Parameter number whose value is written from a communications device data
table.
Parameters that can be changed only while the drive is stopped cannot be used as
Datalink inputs. Entering a parameter of this type disables the link.
Refer to the appropriate communications option board manual for datalink
information.
Parameter number whose value is written to a communications device data table.
304
305
Data In C1 - Link C Word 1
Data In C2 - Link C Word 2
Range:
0...387 [1]
Default:
0 (Disabled)
Access:
1
Path: Communication > Datalinks
See also:
306
307
Data In D1 - Link D Word 1
Data In D2 - Link D Word 2
Range:
0...387 [1]
Default:
306 = 34
307 = 35
Access:
1
Path: Communication > Datalinks
See also:
IMPORTANT
In Liquiflo 2.0 drives, datalink D is used for inverter/rectifier communication.
Do not change these two parameters.
310
311
Data Out A1- Link A Word 1
Data Out A2 - Link A Word 2
Range:
0...387 [1]
Default:
0 (Disabled)
Access:
1
Path: Communication > Datalinks
See also: