Rockwell Automation 1783-BMxxx Stratix 5700 Ethernet Managed Switches User Manual - Manual (Page 142)

142 Rockwell Automation Publication 1783-UM004E-EN-P - June 2014
Chapter 4 Manage the Switch via the Device Manager Web Interface
Assign Ports to VLANs
To assign ports to VLANs, use the Edit Physical Ports window, as described on
page 132 .
Configure Power over
Ethernet (PoE) Ports PoE and PoE+ features are supported on switches with PoE ports when a correct
power supply is connected to the switch. For power supply requirements, see
page 44 .
You can do the following from the PoE window:
• Limit the total power supported.
• Configure mode and power settings for individual ports.
For most applications, the default configuration (Auto mode) is sufficient and no
further configuration is required. However, you can customize the settings to
meet your needs. For example, to give a PoE port higher power priority, set the
mode to Static and allocate the power to be used. As another example, to disallow