Rockwell Automation 900-TC32 Digital Temperature Controllers, Series B - Manual (Page 84)

Publication 900-UM007D-EN-E - January 2011
3-14 Configuration & Basic Operation
• The default is 0 (shaded).
Selecting
°C/°F
Temperature Units
The Bulletin 900 controller allows you to select either
°C or °F as the
temperature unit.
Configure the temperature units in the Temperature Unit parameter of Initial
Setting function group.
Note: The default is
°C.
Example Operation Procedure: Select
°C
1. Press the
O
key for at least 3 seconds to move from the Operation
function group to the Initial Setting function group.
Figure 3.13 — Operation Function Group
Figure 3.14 — Initial Setting
Table 3.D — Analog Input Types (not supported by 900-TC32)
Input Type Specifications Set Value Process Input Setting Range
Models with
Analog Input Current input 4…20 mA 0 Either of the following ranges can be used by scaling
−1,999…9,999
−199.9…999.9
−19.99…99.99
−1.999…9.999
0…20 mA 1
Voltage input 1…5V 2
0…5V 3
0…10V 4
C 30
0
in-t
5
Input type