ETC Echo Architectural Control Processor (ACP) v1.0.0 - Manual (Page 59)

3
Programming 54
Restore Defaults
The “Restore Defaults” operation erases all memories, excluding removable media, and
returns the specified configuration(s) to factory defaults. “Restore Defaults” is prohibited
while the Emergency input is active.
Step 1: Scroll to select “Restore Defaults” from the “File Operations” menu and press
enter (
).
Step 2: Select to restore defaults to either the “Arch (E-ACP)”, the “Dimming (DRd)”, or
“All”. Press enter (
) to accept the selection.
Step 3: Scroll to select “No” or “Yes” and press enter ( ).
• If “No” is selected, the display returns to the “File Operations” menu.
Pressing the back ( ) button has the same affect as selecting “No”.
• If “Yes” is selected for the selected option, all memories are erased,
excluding removable media, and configurations are restored to factory
defaults.
N o t e : Before proceeding with “Restore Defaults”, save your current architectural and
dimming rack configurations to removable media device so that you can always
revert back if needed.
Restore Defaults
Select settings
to default:
Arch (E-ACP)
Dimming (DRd)
All
Restore Defaults
Arch (E-ACP)
settings in memory
will be lost!
Are you Sure?
No
Yes
• Before the Echo ACP restores the
configuration factory defaults, you are
provided with one last opportunity to
cancel the “Restore Defaults” operation.