ETC Echo Architectural Control Processor (ACP) v1.0.0 - Manual (Page 21)

1
UI Overview and Installation 16
System Status
When the Echo ACP is installed and power is applied to the enclosure, the graphic LCD
illuminates and displays Dimming Rack Status.
Check the status LEDs for indication of power, control, and rack status. Each indicator is
visible from the front panel of the Echo ACP with the DRd enclosure door closed.
The following indicators are featured:
• Power LED - indicates on solid when the controller has power
• DMX input status - slow blink when no DMX input is received, fast blink when there is
a data error, on solid when valid DMX input is received.
• Ethernet status - blinks with Ethernet network activity
• Error status - slow blink when errors or warning are present and is off when there no
errors present. The Error LED is accompanied by status messages on the graphic LCD.
See “View/Clear Errors Menu” on page 56.
Dimming Rack Status
System OK
DMX Start = 155
Ш1: 119 Ш2: 119 Ш3: 120
60Hz 102F v5.6.7
Arch Control Status
Preset 15 Active
Sequence Inactive
System OK
DMX Start = 155
DMX Input: Active
DRd12 v1.2.3
• Clockwise rotation on the touch
wheel changes the status display
to Arch Control Status.
• Counter-clockwise rotation on the
touch wheel changes the status
display back to Dimming Rack
Status.