BNC 1105 Universal Counter - Manual (Page 63)

63 63 63 63
Default state resetting”. Teaching instruction will be there, such as 1:
Press [Save&Recall]. 2: Press “PwrOn Recall” to select default on
record “0”. 3: Press “Done” to complete setting.
3. Press the softkey under Done to exit from the display to the operation
mode.
4.11.4 Synchronize Multiple Instruments
Users can follow the tips to synchronize multiple instruments. The
operation procedures are in the following.
1. Press the Help button on the front panel in 2 seconds.
2. Press the softkeys under ↓,↑ and SELECT to select item 4
“Synchronize multiple instruments”. Teaching instruction will be there,
such as 1: Connect the [10MHz In] connector from one instrument to
the other instrument. 2: Press [Utility]. 3: Press “Fref” (Freq.
Reference). 4. Press “TimeBase” to select “Auto” or “Ext” as time base
source. 5: Press “Done”
3. Press the softkey under Done to exit from the display to the operation
mode.
4.11.5 BERKELEY NUCLEONICS CORPORATION
Technical Support
Via the tips, users can find the BERKELEY NUCLEONICS CORPORATION contact
information. The operation procedures are in the following.
1. Press the Help button on the front panel in 2 seconds.
2. Press the softkeys under ↓,↑ and SELECT to select item 5 “BERKELEY
NUCLEONICS CORPORATION Technical Support”. The BERKELEY
NUCLEONICS CORPORATION contact information and website will be
shown on the display: To obtain technical support, dial the
number 415-453-9955 or visit BERKELEY NUCLEONICS
CORPORATION Website Http://www.berkeleynucleonics.com