BNC 1105 Universal Counter - Manual (Page 61)

61 61 61 61
TimeBase Source
Follow the following instruction to select TimeBase source:
1. Press UTILITY button.
2. Use the softkey under TimeBase to select timebase source.
3. Use the softkey under TimeBase to toggle between AUTO, INT
(internal) and EXT (external) as shown in the Figure 4-30.
Figure 4-30
Remote Interface Command
[:SENSe]:ROSCillator:SOURce INT︱EXT
[:SENSe]:ROSCillator:SOURce:AUTO ON|OFF
Style
The Style function is the way to present values on the display. Users can
toggle the softkey under Style between the E-6 and µHz notations. Here,
µHz refers to the engineering notation and E-6 refers to the E notation.
1. Press Utility button.
2. Use the softkey under Style to toggle between µHz and E-6 as shown
in the Figure 4-31 and Figure 4-32 respectively.
Figure 4-31 Figure 4-32
4.11 Display Tips
The display tips including 1. View remote Command error, 2. Get HELP on
any key, 3. Power up Default state resetting, 4. Synchronize multiple
instruments, 5. BERKELEY NUCLEONICS CORPORATION Technical
Support, will be presented via the following procedures.