BNC 1105 Universal Counter - Manual (Page 62)

62 62 62 62
4.11.1 View Remote Command Error
Via the display tips, users will easily view remote command error. The
operation procedures are in the following.
1. Press the Help button on the front panel in 2 seconds.
2. Press the softkeys under ↓,↑ and SELECT to select item 1 “View
remote command error”. The command error information will be
shown on the display.
3. Press the softkey under Done to exit from the display to the operation
mode. Error messages will be erased, and the display will show +0,
“No error” as the command SYST:ERR? is executed.
4.11.2 Get HELP on ANY KEY
Users can get HELP from pressing each button including the softkey,
which can provide service. The operation procedures are in the following.
1. Press the Help button on the front panel in 2 seconds.
2. Press the softkeys under ↓,↑ and SELECT to select item 2 “Get HELP
on any key”. The HELP information will be shown on the display: To
get brief help information on any front-panel key or menu
soft-key, press and hold the key for few seconds.
3. Press the softkey under Done to finish the setting, and return to the
operation mode.
4.11.3 Power up Default State Resetting
Users can follow the tips to power up from a specific default state. The
operation procedures are in the following.
1. Press the Help button on the front panel in 2 seconds.
2. Press the softkeys under ↓,↑ and SELECT to select item 3 “Power up