Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 93)

Maintenance
Xerox 4112/4127 EPS 6-7
User Guide
Waste Toner Container Removal Procedure
A message displays on the Touch Screen when the Waste Toner Container is full. If you continue
copying or printing without replacing the Waste Toner Container, the machine stops after
copying or printing approximately 18,000 sheets.
1. Make sure that the machine has stopped copying / printing, then open the Front Cover on
the machine.
2. Open the Waste Toner Container cover and push the lever down.
3. Grasp the handle of the Waste Toner Container with one hand, and pull it out of the
machine about half way.
4. With the other hand, grasp the top, middle part of the bottle, and then using both hands,
pull the entire container out of the machine.