Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 121)

Problem Solving
Xerox 4112/4127 EPS 7-19
User Guide
078-260
078-261
078-262
078-263
078-264
078-265
078-266
078-267
078-268
078-269
078-270
078-271
078-272
078-273
078-274
078-275
078-276
078-277
078-278
078-279
078-280 O Cause: Paper Tray 6 malfunctioned.
Remedy: Check the paper loaded in Tray 6. Power off and
then power on the machine. If the tray errors are not fixed by
performing the relevant remedy, contact the Customer
Support Center.
078-281 O Check the paper loaded in Tray 5 and then power off/on the
printer.
078-282 O Power off/on the printer.
091-311 O Cause: ERU (Engineer Replaceable Unit for the Drum
Cartridge) causing CC (charge corotron) cleaner fail faults.
Remedy: Call for Service.
091-320 O Cause: Charge Corotron fault.
Remedy: Power off/on the machine.
112-700 O Cause: Punch Scrape Container is full or near full.
Remedy: Remove and empty the scrape container and
reinstall.
116-701 P Cause: 2 sided print could not be made.
Remedy: Print each side separately.
116-702 P Cause: Printing was performed using a substitute font.
Remedy: Check the print data.
116-703 P Cause: An error occurred during PostScript processing.
Remedy: Either confirm the print data or click Spool Settings
on the Details tab in the print driver to set bi-directional
communications to off.
116-710 P Cause: A probable cause is that the correct document size
could not be judged as the receive data exceeded the HP-GL/
2 spool size.
Remedy: Increase the size assigned to HP-GL/2 auto-layout
memory.
116-713 O Cause: Job was divided and printed due to insufficient disk
space.
Remedy: Remove unnecessary data from the hard disk to
increase free disk space.
Error Code
Category
Cause and Remedy
Print/Other