Hcs top tray jam (e7), Hcs exit jam (e8), Hcs top tray jam (e7) -27 hcs exit jam (e8) -27 – Xerox 4112-4127 Enterprise Printing System-4612 User Manual
Page 203
Addendum
Xerox 4112/4127 EPS
9-27
User Guide
HCS Top Tray Jam (E7)
Perform the following steps to clear the HCS Top Tray jam and resume printing:
1.
Open the HCS Front Cover.
2.
Remove the jammed paper from the Top Tray.
3.
Close the HCS Front Cover.
4.
If the UI indicates there is a jam in the digital press, follow the instructions on the screen to remove
any paper in the area indicates. Refer to the Jam Clearance section in the Problem Solving chapter in
this manual.
5.
Follow the instructions displayed on the digital press UI to resume printing.
HCS Exit Jam (E8)
Perform the following steps to clear the HCS Exit jam and resume printing:
1.
Open the HCS Front Cover. Follow the instructions located inside the Front Cover to clear the E8 jam.
2.
Lift the green handle and/or rotate the green knob and remove all paper in the exit area.
3.
Close the HCS Front Cover.
4.
If the UI indicates there is a jam in the digital press, follow the instructions on the screen to remove
any paper in the area indicates. Refer to the Jam Clearance section in the Problem Solving chapter in
this manual.
5.
Follow the instructions displayed on the digital press UI to resume printing.