Paper jams at output area of finisher, Paper jams at output tray, Paper jams at finisher tray – Xerox 4112-4127 Enterprise Printing System-4612 User Manual
Page 149: Paper jams at output area of finisher -47
Problem Solving
Xerox 4112/4127 EPS
7-47
User Guide
Paper Jams at Output Area of Finisher
Paper jams at output tray
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1.
Remove jammed paper from the output tray.
Note
If paper is torn, check inside the machine and remove it.
2.
Open and then close the right cover of the finisher completely. The machine will not
operate if the cover is open even slightly.
Paper jams at finisher tray
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1.
Remove jammed paper from the finisher tray.
Note
If paper is torn, check inside the machine and remove it.
2.
Open and then close the right cover of the finisher completely. The machine will not
operate if the cover is open even slightly.