Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 79)

Machine Status
Xerox 4112/4127 EPS 5-19
User Guide
Programming
1. Select PDF on the Print Mode screen.
2. Select Programming.
3. Enter the 3-digit item number in the Item Number field. Refer to the following table for
parameters, item numbers, and values.
4. Select Change Value.
5. Enter the required value in the New Value field.
6. Select Save.
Parameter Item Value
Print Sets 401 1-999 (Default: 1)
Specify the number of print sets.
2 Side Print 402 0: Off (Default)
1: LEF Binding
2: SEF Binding
Specify which edge of the paper is to be bound for
double-sided printing; Long Edge Feed or Short Edge
Feed.
Print Mode 403 0: Standard (Default)
1: Fast
2: High Quality
Sort 404 0: Off (Default)
1: On
Enable or disable sorting.
Layout 405 0: Auto Reduce/Enlarge (Default)
1: Booklet
2: Two-up
3: Four-up
4: 100% (actual size)
[Auto Reduce/Enlarge] prints with magnification to fit
the paper size selection.
[Booklet] specifies duplex printing.
[Two-up] and [Four-up] print two and four pages on a
single sheet of paper.
Paper Size 406 0: Auto
1: A4 or Letter (Default)