Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 17)

Product overview
Xerox 4112/4127 EPS 1-9
User Guide
Optional finishing accessories
Finishing accessory Description
Where to find
information
Standard Finisher (with or without
optional C/Z Folder) The Standard Finisher (with
or without the optional C/Z
Folder) allows you to staple
or hole-punch your
output. The Top Tray holds
of 500 sheets (20lb/80gsm),
while the Stacker Tray holds
3,000 sheets (20 lb/80 gsm).
The optional C/Z Folder
allows C-folding and Z-
folding of 8.5 x 11 in./A4
output, and 11 x 17 in./A3
media.
Information on the
Standard Finisher (and
otpional C/Z Folder) can
be found throughout this
user guide. Refer to the
table of contents and the
Index for specific page
locations.
Booklet Maker Finisher with optional C/Z
Folder The Booklet Maker Finisher
(with or without the optional
C/Z Folder) includes all the
features of the Standard
Finisher plus:
•
Automatically creates
booklets of up to 25
pages
• Creates booklets from
12 x 18 in./SRA3, 11 x
17 in./A3, 8.5 x 14 in.
and 8.5 x 11 in./A4
Information on the
Booklet Maker Finisher
(and optional C/Z Folder)
can be found throughout
this user guide. Refer to
the table of contents and
the Index for specific page
locations
High Capacity Stacker (HCS) and required
Interface Module The HCS provides stacking
and offsetting capabilities
for output, while the
Interface Module (IM) acts
as a communication device
and paper path between the
printer and the High
Capacity Stacker.
Note:
The Interface Module is
required in order to use the
HCS.
Information on the HCS
and Interface Module can
be found in this user guide
in Chapter 14 Addendum.
Booklet
Maker Tray
HCS