Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 139)

Problem Solving
Xerox 4112/4127 EPS 7-37
User Guide
Paper Jams Inside Finisher Right Cover
Paper jams at lever 3b and 3d
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the Right Cover on the
light finisher.
2. Move levers 3b and 3d to the left, and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return levers 3b and 3d to the original position.
4. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.