Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 146)

Problem Solving
7-44 Xerox 4112/4127 EPS
User Guide
4. Swing back the opened lever (2f or 2e), and push back the tri-fold output tray 2d.
5. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
Paper jams at tri-fold output tray 2d and lever 2g
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
light finisher.
2. Pull out the tri-fold output tray 2d, swing lever 2g to the right, and remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.