Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 126)

Problem Solving
7-24 Xerox 4112/4127 EPS
User Guide
4. Lift up lever 4a and then remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
5. Return lever 4a to the original position.
6. Push Tray 2 in gently until it comes to a stop. Transport Unit 4 will be inserted
simultaneously.
7. Push Tray 1 in gently until it comes to a stop.
8. Close the front cover completely. The machine will not operate if the front cover is open
even slightly.
Paper Jams in Duplex Module 3
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing before opening the front cover.
2. Pull out Duplex Module 3.