Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 137)

Problem Solving
Xerox 4112/4127 EPS 7-35
User Guide
Paper jams at lever 1d
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the left cover on the
finisher.
2. Move lever 1d upwards and remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return lever 1d to the original position.
4. Close the Finisher left cover completely. The machine will not operate if the cover is open
even slightly.