Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 191)

Addendum
Xerox 4112/4127 EPS 9-15
User Guide
OHCF fault codes
If a jam/fault occurs in the Oversized High Capacity Feeder, the machine’s UI displays a jam/
fault message. The following table provides a list of fault codes for the Oversized High Capacity
Feeder and a list of related finisher fault codes.
Fault code Possible cause Recommended solution
024 955
024 956 An OHCF tray is empty or
out of paper Add paper to correct OHCF Tray.
077 210 An OHCF tray is broken 1. Power Off/On.
2. If problems persist, contact the
Customer Support Center. Trays other
than the OHCF trays may be used in the
interim.
078 100
078 101
078 102 An OHCF tray has
malfunctioned 1. Check the paper in the malfunctioning
tray.
2. Power Off/On the machine.
3. If the errors persist, contact the
Customer Support Center.
078 210
078 211 An Optional OHCF tray
malfunctioned 1. Check the paper setting of the paper
trays and power Off/On the machine.
2. If problems persist, contact the
Customer Support Center.
Note
Trays other than the OHCF trays may be
used in the interim.
078 260
078 261
078 262
078 263
078 264
078 265
078 266
078 267
078 268
078 269
078 270
078 271
078 272
078 273
078 274
078 275
078 276
078 277
078 278
078 279
078 280 An OHCF tray
malfunctioned 1. Check the paper loaded in the trays.
2. Power Off/On the machine.
3. If problems persist, contact the
Customer Support Center.