Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 11)

Product overview
Xerox 4112/4127 EPS 1-3
User Guide
No. Component Function
1 Post-process Inserter
(Cover/Transparency separator
tray) / Tray 8 Load paper for preprinted tabs, covers or transparency
separators. (This tray is also known as the Interposer)
2 Decurl button When you press this button, it activates a decurling feature
for the output material. This applies to lighter weight paper
especially
3 Output Tray Prints are delivered here when specific output features are
selected, such as Automatic sorting, Collated, Uncollated, or
Normal.
4 Finisher Tray Receives prints when you select stapled, punched, and Z-
folded copies.
5 Booklet Output Tray Receives prints when you select Bi-Fold or Bi-Fold + Stapling.
6 Booklet Output Tray button When you press this button, the booklet output tray is raised
so you can retrieve booklets from the output area.
7 Right Cover Open to clear paper jams, replace staples, clear jammed
staples, or remove the scraps from the puncher.
8 Staple Cartridges for Booklet There are two staple cartridge for booklet. Remove this
cartridge to replace staples and clear staple jams.
9 Staple Cartridge Contains staples; remove this cartridge to replace staples
and clear staple jams.
Finisher
1
2
3
4
5
6
7
8
9 10
11
12
13
14