Xerox 4112-4127 Enterprise Printing System-4612 - Manual (Page 68)

Machine Status
5-8 Xerox 4112/4127 EPS
User Guide
PCL Emulation
Select the PCL Emulation button to set parameter values for printing jobs with PCL emulation.
1. Select PCL Emulation on the Print Mode screen.
2. Enter the 3 digit item number for the parameter that you want to change. The item
numbers are shown in the following table.
3. Select Change Value.
4. Enter the required value.
5. Select Save.
Parameter Item Value
Paper Tray 201 0: Auto (Default)
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Tray 5 (Bypass)
6: Tray 6 (HCF)
7: Tray 7 (HCF)
Select the paper tray. When Auto is selected, the machine automatically
selects the tray based on the paper size specified on the Paper Supply screen.
Auto Size 202 3: A3
4: A4 (Default)
5: A5
14: B4
15: B5
21: 8.5 x 14 in.
22: 8.5 x 13 in.
23: 8.5 x 11 in.(Default)
24: 11 x 17 in.
30: 8K
Select the default paper size when the machine is set to select paper size
automatically (set to Auto). The default value is A4 or 8.5 x 11 in.depending
on the region.
Bypass Size 203 3: A3
4: A4 (Default)
5: A5
14: B4
15: B5
21: 8.5 x 14 in.
22: 8.5 x 13 in.
23: 8.5 x 11 in.(Default)
24: 11 x 17 in.
Sets the paper size for the bypass tray. Only available when Paper Tray is set
to Tray 5 (Bypass). The default value is A4 or 8.5 x 11 in.depending on the
region.
Orientation 205 0: Portrait (Default)
1: Landscape
2 Side Print 206 0: Off (Default)
1: On