Manual duplexing 34 autoduplexing 34 – Konica Minolta Magicolor 7300 User Manual
Page 42
Duplexing
34
Manual Duplexing
Media jams may occur if the printed sheet(s) are not reinserted entirely flat.
If you do not have a duplex option installed, the Booklet setting should
always be turned off.
Manual Duplexing Postcard from the Manual Feed Tray
1
In the printer driver, select Postcard side 1 to print the front side of the
postcard.
2
Remove the postcard from the output tray and place it back into Manual
Feed Tray, blank side down.
3
In the printer driver, select Postcard side 2 to print the back side (address
side) of the postcard.
Autoduplexing
Attention
Only plain paper up to 17-24 lb (64-90 g/m²), with a length equal or less
than 17 inch (432 mm), and with a width less than 11.7 inch (297 mm)
can be autoduplexed.
Memory Requirements
Your printer comes configured with 256 MB of RAM. Duplex printing can be
done automatically with a duplex unit and manual feed tray and enough
memory installed, and with the duplex option selected in the printer. Most
print jobs will print with 256 MB of RAM, but may not print at the desired
resolution.
You may need extra RAM to duplex print jobs that have:
–
Very high coverage of text and images
–
Large graphics
Additional memory can be added up to a total of 512 MB.