Konica Minolta Magicolor 7300 - Manual (Page 146)

Duplex Unit Kit 138
10
Pull up the lock release lever to open the right-side door.
Make sure that the
wire on the duplex
unit is hooked onto
the printer.
11
Close the right-side door.
12
Connect the white connector on
the duplex unit with the white
connector on the printer, and
connect the black connector on
the duplex unit with the black
connector on the printer.
13
Close the cover of the duplex
unit.
14
Attach the duplex unit connector
cover .
15
In order to prevent the
wire-releasing tool , which is
used to remove the duplex unit
from the printer, from being lost,
attach it to the connector cover.
16
Proceed to the next step,
“Installing the Manual Feed
Tray.”