Solving problems—printing quality 200 – Konica Minolta Magicolor 7300 User Manual
Page 208
Solving Problems—Printing Quality
200
Irregular
print or
mottled
image
appears.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
The humidity in the
media storage area
may be too high.
Adjust the humidity in the media
storage area.
Media with
specifications not
covered by the printer
warranty is being
used.
Use media that is covered by the
printer warranty. For the most
up-to-date information globally, check
One or more of the
toner cartridges are
defective.
Remove the toner cartridge(s) and
check for damage. If damaged, replace
it (them).
One or more of the
print units may have
been incorrectly
installed or are
defective.
Reinstall the print unit(s). If damaged,
replace it (them).
There is
insufficient
fusing or the
image
comes off
when
rubbed.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Media with
specifications not
covered by the printer
warranty is being
used.
Use media that is covered by the
printer warranty. For the most
up-to-date information globally, check
The media type may
be incorrectly set.
When printing envelopes, labels, thick
stock, and transparencies, the
appropriate media type must be
specified in the printer driver.
Symptom
Cause
Solution