Konica Minolta Magicolor 7300 - Manual (Page 213)

Control Panel Messages 205
Warning Status Messages
LIGHT SLEEP The printer is in the
Energy Saver light
sleep mode. While in
“deep sleep,” the
printer’s message
window will not
display operator
status. The printer remains in
the Energy Saver sleep
modes until a print job is
received, until the
Energy Saver button is
pressed, or until the
printer is manually
turned off and then on
again.
PROCESSING The printer has a
job(s) to be printed. Wait. No action needed.
READY The printer is on and
ready to receive data,
and no jobs are being
processed. No action needed.
STANDBY MODE The printer is in an
Energy Saver
standby mode and is
preheating. Wait. No action needed.
WARMING UP The fuser is warming
up. Wait. No action needed.
This message... means... do this...
ADJUST TRAYS No media tray has
been detected or the
media trays are not
correctly installed. Check to see that the
media tray has been
correctly installed.
ADJUST TRAY Y No specified media
tray (
Y=1-4 ) has
been detected, or the
specified media tray
is not correctly
installed.
Check to see that the
specified media tray has
been correctly installed.
This message... means... do this...