Control panel messages 207 – Konica Minolta Magicolor 7300 User Manual
Page 215
Control Panel Messages
207
MEDIA SIZE ERR
ADD Y
The media size (Y)
set with the printer
driver and the type/
length of media
loaded into the tray
did not match during
printing. Or, media
out is detected during
printing, and a user
loaded media which is
different size than
desired.
Remove the media from
the specified tray and
install the correct media
size, or change the
printer driver setting.
Then, Printing begins
when media is loaded.
MEDIA SIZE ERROR
ADD Y
An incorrect media
size has been
detected in the
specified tray.
Remove the media from
the specified tray and
install the correct media
size, or change the
printer driver setting.
Then, Printing begins
when the correct media
is loaded.
MEMORY FULL
PRESS CANCEL
The printer has
received more data
than can be
processed by its
internal memory.
Press the Cancel key to
clear this message. If
necessary, you can also
decrease the amount of
data to be printed (for
example, by decreasing
the resolution or by
printing only a few
pages at a time), and
then try printing again,
or you can install an
optional memory
module.
NO MANUAL FEED
CHECK UNIT
The manual feed tray
is not available.
Install the duplex unit
with the manual feed
tray. The manual feed
tray is necessary in
duplex printing, even if
media is being fed from
Trays 1–4.
MANL EMPTY
ADD Y
The manual feed tray
is empty.
Insert supported size
media in the manual
feed tray
This message...
means...
do this...