Konica Minolta Magicolor 7300 - Manual (Page 186)

Clearing Media Jams 178
CAUTION
The area around the fuser unit
is extremely hot. Touching
anything other than the
indicated parts may result in
burns. When the right door is
opened, the fuser unit
temperature drops gradually
(20 minutes wait time)
10
If media is jammed in the fuser
unit, lower the two release levers
(M6) for the fuser, and then
slowly pull out the media .
After removing the media, return
the release levers (M6) to their
original positions.
11
If small-sized media or torn
paper is jammed in the fuser, tilt
media guide M7 toward you ,
open the cover, and then slowly
pull out the media .
After removing the media, return
the media guide (M7) to its
original position.