Konica Minolta Magicolor 7300 - Manual (Page 114)

Replacing a Print Unit Assembly 106
34
Install the new toner cartridge.
If you are replacing just the toner cartridge, continue with “Removing an
Empty Toner Cartridge.” If you are replacing the toner cartridge as a part of
the entire print unit assembly, skip to “Installing a New Toner Cartridge.”
Auto-Image Density Control (AIDC)
The printer automatically pauses for an Auto-Image Density Control (AIDC)
calibration cycle (minimum 198 seconds, maximum 241seconds) after the
installation of a new print unit. This process is provided to ensure reliable
printer operation with optimum output quality.
If you open the door before READY appears in the message window,
the printer stops and repeats the calibration cycle.