Konica Minolta Magicolor 7300 - Manual (Page 150)

Uninstalling Duplex Unit Kit 142
1
Turn off the printer, and then unplug the power supply cord and interface
cable.
2
While pressing down the release
levers (one on each side) for the
manual feed tray, unhook the
guides on the printer.
Uninstalling the Duplex Unit
Attention
It’s very important to protect the printer from electrostatic damage.
Before performing this procedure, review the antistatic caution on page
129.
Before transporting the printer, be sure to remove the duplex unit.
Remove the duplex unit according to the procedure described below.
Before removing the duplex unit, be sure to remove the manual feed
tray.
1
Turn off the printer, and then unplug the power supply cord and interface
cable.
2
While pressing down the release
levers (one on each side) for the
manual feed tray, unhook the
guides on the printer.