Konica Minolta Magicolor 7300 - Manual (Page 26)

Media Types 18
Envelopes
Use envelopes that are
Common office envelopes approved for laser printing
Made with diagonal joints, sharp folds and edges, and ordinary gummed
flaps
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Dry
To be printed on the front address side only
Do not use envelopes that have
Sticky flaps
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips
for sealing
Transparent windows
Too rough of a surface
Material that will melt, vaporize, offset discolor, or emit dangerous fumes
Been presealed
Capacity Tray 1 Up to 50 envelopes, depending on their
thickness
Trays 2–4 Not supported
Manual
Feed Tray 1 envelope at a time
Orientation Tray 1 Face up
Manual
Feed Tray Face down
Type Check printer.konicaminolta.net/support (click on “Answer
Base”) for currently approved media.
Driver
Mode Envelope
Duplexing Not supported