beautypg.com

Konica Minolta Magicolor 7300 User Manual

Page 104

background image

Replacing a Print Unit Assembly

96

By printing the Statistics page or by using PageScope Light, the percentage
of life remaining on the toner cartridges and the current print units can be
checked.

However, if the life of the print unit reaches 0% but the toner in the attached
toner cartridge has not yet reached 0%, the message “

PRINT UNIT END/

REPLACE KMCY

” will not appear in the message window of the printer.

It will not be necessary to replace the print unit until the toner cartridge runs
out of toner. This allows for efficient use of the toner cartridge and print unit.

When lives of both the print unit and the toner cartridge have reached 0%, the
message “

PRINT UNIT END/ REPLACE KMCY

” appears.

When this message appears, replace the print unit with the toner cartridge
attached to it.

After the new print unit is installed into the printer, attach a new toner
cartridge to the new print unit.

Follow the instructions below to replace the print unit assembly. All print units
are replaced in the same way. The only difference is the specific cartridge slot
into which they’re placed.

Attention

Be careful not to spill toner inside the printer or on yourself while
removing a print unit or toner cartridge. If toner spills, immediately wipe
it off with a soft, dry cloth.

Installing a Print Unit

1

Check the message window to see which color print unit needs replacing
(Y = Yellow, M = Magenta, C = Cyan, and K = Black). In this example,
we’ll assume that the yellow print unit needs to be replaced.

2

Open the printer’s front door.