beautypg.com

Konica Minolta Magicolor 7300 User Manual

Page 171

background image

Lower Feeder Units (Trays 3 and 4)

163

25

Plug the black 3-pin connector on that
power supply harness B into Tray 4’s
black 3-pin socket on power supply
harness A (with the core attached).
Then, plug the power supply harness
A’s white 2-pin connector into the white
PJ6 socket on Tray 4’s unit.

26

Secure the harness with the cable
holders so that the core is between the
holders on Tray 4’s unit.

27

Secure the long looped
harness with the cable
holders on Tray 2’s
and 3’s units.

Snap all the cable
holders closed if you
haven’t done that yet.

Attention

Do not pinch the wires.