Konica Minolta Magicolor 7300 - Manual (Page 172)

Lower Feeder Units (Trays 3 and 4) 164
28
Reinstall the rear cover of
each lower feeder unit.
Attention
Do not pinch the wires.
29
Reinstall the connector
cover of the printer.
30
Affix the media size label furnished with
the unit on the tray handle.
In compliance with UL
guidelines, the appliance inlet is
considered to be the main
disconnect device.
31
Check the configuration page from the control panel ( Print Menu/
Configuration menu ) to verify the installation of the lower feeder
unit(s).
32
Configure your driver for the new lower feeder unit(s) (see “Working with
the Printer Driver” on page 57).