Konica Minolta Magicolor 7300 - Manual (Page 123)

Replacing Media Pickup and Separator Rollers 115
8
Slide the new media pickup
roller onto the shaft as far as
possible, making sure that the
notch in the shaft at the front of
the media pickup roller can be
seen.
During installation, be
careful not to touch the
surface of the roller.
9
Attach the C-clip at the front of
the media pickup roller.
10
Insert the shaft into its holder,
making sure that the notch in the
shaft can be seen, and then
attach the C-clip.