beautypg.com

Konica Minolta Magicolor 7300 User Manual

Page 110

background image

Replacing a Print Unit Assembly

102

Attention

Since the print unit is very sensitive to light, do not remove it from
its protective bag until immediately before installation. Be sure to
protect it from light and install it in the printer as soon as possible.

Be careful not to touch or damage the green surface of the OPC. If
you need to set the print unit on a flat surface, make sure it is not
resting on the OPC.

Do not touch the terminals on the print unit; otherwise, the
electronic parts of the print units may be damaged by static
electricity from your body.

Any damage resulting from mishandling of the print unit will void the
warranty of the print unit.

23

Grab the print unit handle with your left
hand, hold onto the knob with your right
hand.

24

Check that the color of the print
unit is the same as the color
indicated in the print unit
compartment.

The order of the print unit
compartments from right to left is
yellow, magenta, cyan, and black.