beautypg.com

Konica Minolta Magicolor 7300 User Manual

Page 168

background image

Lower Feeder Units (Trays 3 and 4)

160

17

Connect the other end of the
control harness connected to
Tray 2’s upper connector to the
connector on the back of the
printer.

18

Plug the black 3-pin connector of power
supply harness A (with the core
attached) into a black socket at the
back of the printer, and then plug the
power supply harness A’s white 2-pin
connector into the white PJ6 socket on
Tray 2’s unit.

The 3-pin connector (black) can
be plugged into any of the three
sockets on the printer. As an
example, the illustration at the
right shows the connector
plugged into the lower-left
connector.