Konica Minolta Magicolor 7300 - Manual (Page 108)

Replacing a Print Unit Assembly 100
16
Pull out the print unit together with
its disposal bag.
Attention
While pulling out the print unit,
do not allow toner to spill.
Firmly grab the print unit so that
it does not fall.
WARNING!
If toner gets in your eyes, immediately flush them with water, and
then seek medical attention. Material Safety Data Sheet (MSDS)
information can be found at
printer.konicaminolta.net/support ( click
on “Answer Base”).
17
Fold over the opening of the print
unit disposal bag while making sure
that toner does not spill.
18
When placing the used print unit,
which has been removed, on a
desk, for example, place it on old
newspaper and position it.
19
Hold the left and right ends of the
new print unit, wrapped in the alumi-
num pack, and then turn the print
unit over toward you.