Konica Minolta Magicolor 7300 - Manual (Page 122)

Replacing Media Pickup and Separator Rollers 114
Media Pickup Roller for Trays 2
1
Pull out the tray.
2
Press down on the media-lifting
plate until it locks down.
3
Remove the C-clip securing the
shaft for the media pickup roller (on
the right side of the tray).
4
Slide the shaft back to remove it from its holder at the front.
5
Remove the C-clip securing the
media pickup roller, and then
remove the media pickup roller from
the shaft.
6
Remove the new media pickup roller
from its packaging.
7
Place the used media pickup roller in the box and plastic bag that the new
roller came in.
Attention
Dispose of the used media pickup roller in accordance with local
regulations.