Konica Minolta Magicolor 7300 - Manual (Page 177)

Warmup and Calibration Time 169
Warmup and Calibration Time
Time Wait
(Seconds) Occurrence Description
First Page Out 13 From READY (plain
paper)
Monochrome
16 Color
Maximum
Warmup Time 99.9 From Cold Boot Warms up fuser
30 From Warm Boot
99.9 From Energy Saver
241 From all four print units
replaced
198 From one print unit
replaced
Light Calibration 99.9 At warking from deep
sleep Energy Saver
mode Adjusts the laser
intensity and
developing
parameter to
maintain
maximum density
Heavy Calibration All four
units at the
same time:
241
One unit:
198
At replacement of the
print unit assem-
bly(ies) Adjusts halftone
(gamma curve),
registration, and
maximum density
Intermittent
Printing
Calibration 86 Immediately after
page 200 or just
before page 201 Adjusts maximum
density
Continuous
Printing
Calibration 26 Every 11 minutes of
continuous printing
Toner Cartridge
Replacement
Calibration All four
cartridge at
the same
time: 241
One
cartridge:
198 At toner cartridge
replacement if power
is on Allows engine to
detect cartridge
installation:
adjusts maximum
density